It is a workbench for nailing 2 and 4 way entry pallets.
Its clamps, which are positioned for the lead board, make it easy to put the pallet together.
It has two sets of clamps, one for the top deck and one for the bottom deck of the pallet.
It also includes riveters for 4 way entry pallets. It can be adapted to different sizes, within its own limitations, via a crank that opens and closes the mould.
The operator nails the bottom deckboard on the workbench, he turns it over to put it in a designated place. Later, he puts the pieces of cut wood for the top of the pallet together in order to nail it down.
Finally, the operator extracts the pallet from the mould to stack it. As an optional accessory, it also has an automatic stacker.
High production, minimum maintenance
Easy installation, machine assembled, ready for operation
Versatility, for 2-way and 4-way pallets
Mould opening and closing handle
|Total measurements (mm)||According to variant||Maximum pallet section (mm)||1300x1300|
|Weight (kg)||400 kg||Speed (pallets/min)||According to the speed of the operator|
|Operating temperature (ºC)||-5 - 45||Speed (caps/min) (CAPS)||According to the speed of the operator|
|Relative air humidity (%)||0 - 85||Outbound conveyor||According to variant|
|Pallet types (entries)||2 and 4||Type of drive||Manual|
|Minimum pallet section (mm)||800x800||Structure||Steel|
Positioning clamps for top boards
Positioning claws for bottom boards
4-inlet pallet riveters
Manual nailing table D200A
30-day money-back guarantee
Free Shipping in U.S.
Buy now, get in 2 days